This is a hangloose surfer Hawaiian vinyl decal or sticker glossy white.

Description

This is a hangloose surfer Hawaiian vinyl decal or sticker is glossy white. You also have the option of choosing another color. Samples are shown in the pictures area. Please send me a message with your purchase if you want something different than glossy white.
The actual measurements of the sticker are approximately 8 X 5 in. The sticker is glossy white, the black part represents what it would look like on a black background, like a tinted window.  My cutter cuts the decals using Oracle 651 vinyl, which is of intermediate grade quality,  it can last up to 5 years outdoors and even longer indoors. Please check out the specs from Oracle site for specifics on the material. These stickers are cut a certain way so that it is very important to use application tape for applying the sticker. I will send one piece of application tape that will fit the sticker and I will apply it for you. Please read or watch a tutorial online to learn how to apply a vinyl sticker. The application tape included can be used for wet or dry application. You can use soap and water to apply it, for instance on a window, or for regular dry application. If the pieces are very small in the design please take some tack off of the application tape by applying it to something lint free remove and reapply acouple times. Good luck and thank you.
Please reador watch a tutorial online to learn how to apply a vinyl sticker in addition toreading this it may help to see someone do it, if it is your first time. I alsoincluded step by step instructions below.
Equipment Needed
A credit card or avinylsqueegee, and application tape.
How to apply sticker:
The idea is the tape appliedto the top of the sticker will hold everything in place while you safely pulloff the backing of the sticker.
If you need anythingspecific with a sticker, custom sizes or designs, colors, let me know. Thanksagain. Email me if you have any questions about applying the sticker or usingthe included application tape.
Paulie4000
Steps:
1. Apply pressure over the whole sticker with the credit card orsqueegee. Flip over.
2. Pull off the backing ofthe sticker. This is the waxy piece of paper underneath your sticker. Make sure when pulling the backing off the sticker pieces are all sticking to the app tape, if not lay part back down press with card or squeege on part not sticking and try again. Be carefulafter you pull off the backing, the sticker will stick to anything like crazy.
3. Line up sticker properly;place one side down, then slowly credit or squeegee from left toright until thewhole sticker is down. Go over the whole sticker pushing out any air bubbles orparts that are not all the way down.
4. Carefully and slowly pulloff application tape making sure all sticker parts are staying on the mediumyou are applying the sticker to. If something not sticking (which is rare,usually only for real small pieces) go back and reapply with squeegee or creditcard directly on part not sticking and then try again, repeat until stuck down.
5. Go over the whole stickerlightly with squeegee or credit card.
For wet application
1.Spray the surface thatyou want the sticker to be approximately, with soap and water.
2. Place sticker over thesprayed area and slide around until in correct spot, do this quickly, it willstart to stick. Once the sticker is where you want it…
3. With squeegee, or creditcard, start pushing and pulling the water out from under the sticker with theedge of the card or squeegee, keep doing this tell no bubbles and almost allthe water is out.
4. Carefully pull applicationtape off, making sure it isn’t taking off any of the sticker.
5. Wipe down with soft cloth and let dry.
Congratulations onapplying your sticker!
If you need anything specific with a sticker, custom sizes or designs, colors,let me know. Thanks again. Email me if you have any questions about applyingthe sticker or using the included application tape.